Piston components include: piston, piston rod, piston ring, etc.The piston reciprocating movement in the cylinder plays the role of compressed gas, so it is required to reduce wear as much as possible
2020/05/22 keepwin
1. Sundries fall into the cylinderDebris falling into the cylinder will cause damage to the parts and make abnormal noise. According to the characteristics of sound, it can be judged as follows:(1) If
2020/05/21 keepwin
Use feeler gauge or jade lead method to check the radial clearance of large head bearing of air compressor, and the adjustment method is as follows:(1) For the thick wall bearing with adjusting gasket
2020/05/21 keepwin
The Framework of connecting rod Big Finish of Oxygen compressor is divided into:Integral -- Big Mind that cannot be disassembled, with bearing bush adjustment wedge Metal;Split - detachable Big Finish
2020/05/21 keepwin
1. Improper radial clearanceThe radial clearance of the connecting rod small end bush must be properly selected, otherwise, an accident will be caused:Too large clearance - the knocking sound is produ
2020/05/20 keepwin
The common fault features of the main shaft (i.e. crankshaft) and the main bearing are excessive heating and abnormal noise of the main bearing.In order to know whether the main bearing bush is overhe
2020/05/20 keepwin
The engine oil can separate the combination of the machine and the concrete and erode the foundation. Therefore, special attention should be paid to prevent oil leakage so as to eliminate a series of
2020/05/20 keepwin
