200bar 150bar Oxygen Gas Cylinder Filling Ramp Oxygen Compressor for Hospital medical

Keepwin diaphragm compressors are ideal for compressing all types of gases without incurring any contamination of the process media or leakage of gas to ambient air that results from reciprocating and other types of compressors. Traditional reciprocating compressors are subject to leakage past the piston rings which can result in contamination of the process gas with the hydraulic oil.

  • Model: GD-100/5-200
  • Flow Rate: 100Nm3/h
  • Suction Pressure: 5barg
  • Discgarge Pressure: 200barg
  • Compressor Mediums: Oxygen Gas
  • Power: 37KW
  • Luricating Type: Oilfree
  • Cooling type: Water cooling

Keepwin Gas solution | Reciprocating compressor

Product NameOxygen Gas Booster Diaphragm Compressor 
ModelGD-100/5-200
Compress medium99% Oxygen gas  
TypeD type, Two Diaphragm, Two stage, Single action,Water Cooled, Oil free diaphragm compressor keepwin compressor
Capacity flow rate100Nm3/h  
Suction pressure5bar (G)
Discharge pressure200bar (G)
Shaft Power<30KW
Driven methodBelt drive with belt guard
Suction temperature40 °C;
Transmission temperature<45℃(after water cooled)
Speed400r/min
Main part materialCylinder Head:2Cr13, Gas Pipeline/Flange/ Water pipeline/Cooler/ Oil pipeline: 304L; Diaphragm: 00Cr15Ni15;
Crankshaft:42CrMo;  Piston rod: 40Cr;   Cylinder / Piston: 45#; Crankcase: HT200
O-ring:Fluorine rubber;
Cooling methodWater cooling ( note: the customer's local water tower's working pressure should 0.2-0.4Mpa, and inlet temperature <10℃)
Water consumption3.8 t/h
Dimension3200×2200×1700mm(for this dimension not included the control cabinet. The control cabinet was separated installed in save area.)
N.W Weight6000kgs
Install positionIndoor or outdoor with shed
Noise≤85dB(A) (within 1m distance)
Paint color can according to client's requirement to paint
Motor typeY Series, Three Phases, Asynchronism, High efficient motor
Motor Power37KW
Motor speed1450r/min
Voltage220V/60Hz/3ph
Protection levelIP 55; Temperature rise Class B;

Providing World-Class Diaphragm Compressors


The leak-tight and contamination-free features ofKeepwin's diaphragm compressor keepwin compressors provide numerous benefits. When toxic or hazardous gases are being processed, these keepwin compressors protect the health of workers and the environment and maintain a safe operating area. Since the process gases are totally isolated and have no contact with hydraulic, lubricating, or cooling fluids, high-purity and expensive gases can be processed without any contamination or losses.


Keepwin Gas solution | Reciprocating compressor

KEEPWIN compressors are used in virtually every industry in which high-purity, rare, or hazardous gases are utilized. Some specific uses include:


1. Flammable, oxidizing, toxic, and radioactive gases 2. Gas cylinder filling 3. Gas blending and mixing systems 4. Gas transfer and filling and off-loading of tube trailers 5. Chemical and petrochemical gas processing systems 6. Gases for electronics, semiconductor, and fiber optics manufacturing 7. Pressure boosting and storage of gases from on-site gas generation systems 8. Pressure boosting for gas recycling systems 9. High-pressure gas storage systems 10. Hydrogen gas systems at electric power plants 11. Hydrogenation systems 12. Supercritical fluids and solvent extraction systems 13. Research and Development

Keepwin Gas solution | Reciprocating compressor

Some of the other features and benefits of Keepwin’s diaphragm compressors include:

1. Design pressures to over 900 bar / 13,050 psig 

2. Gas flow rates over 2,000 Nm3/hour 

3. Fast-acting leak detection systems to indicate diaphragm and seal failure 

4. Safe, non-flammable hydraulic fluid used for oxygen and other oxidizing gas applications 

5.Single and multiple stage configurations for high compression ratios

6. Horizontally opposed designs available for high-efficiency operation

7. Process contacting metals are available in a variety of alloys for compatibility with process gases

8. Process contacting seals are available in a variety of elastomers and ductile metals for compatibility with process gases

9. Unique cavity design feature for low or high-pressure operations

Keepwin Gas solution | Reciprocating compressorKeepwin Gas solution | Reciprocating compressor

The advanced horizontally-opposed crankcase designs used in many of KEEPWIN's duplex and 2-stage compressors yield numerous advantages.

1. Energy efficiency 

2. Easy maintenance 

3. Minimal unbalanced forces 

4. All compression loading on rod 

5. Reduced load on crankshaft bearings 

6. No troublesome transition assembly 

7. Duplex units that start up under high inlet pressure without unloading 

8. Low horsepower requirements 

9. Duplex units are capable of compressing different gases simultaneously

Keepwin Gas solution | Reciprocating compressorKeepwin Gas solution | Reciprocating compressor

 

Keepwin Gas solution | Reciprocating compressor


Why Diaphragm Compressors?

Designed and Constructed for High Reliablilty and Low Maintenance

This is accomplished by isolating the process media from the piston and related components with a set of metal diaphragm compressors.

The piston moves a column of hydraulic fluid, which in turn moves the diaphragm compressor-set, and displaces the process media.

The process side of these units is constructed of corrosion-resistant materials to prevent further contamination.


Keepwin  diaphragm compressor keepwin compressors are ideal for compressing all types of gases without incurring any contamination of the process media or leakage of gas to ambient air that results from reciprocating compressor and other types of keepwin compressors. Traditional reciprocating compressors are subject to leakage past the piston rings which can result in contamination of the process gas with the hydraulic oil.


Diaphragm compressors are well-suited for applications ranging from vacuum to pressure as high as 3,000 psig.

Because of the large surface areas of the heads and diaphragms, the presence of pulsing oil and cooling of the upper heads (process side) KEEPWIN keepwin compressors typically run considerably cooler than conventional piston-type reciprocating compressors.



Keepwin Gas solution | Reciprocating compressorKeepwin Gas solution | Reciprocating compressor

Keepwin Gas solution | Reciprocating compressorKeepwin Gas solution | Reciprocating compressor