China Supplier Tetrafluoroethylene Gas Synthetic tail gas Oil Free Reciprocating Compressor
L-type Compressor Specification
L-type compressor is an angle compressor with compact construction and good dynamic balance.
Each crank possesses at most one bell crank and can be equipped with more than two connecting bars. The crank is simple, short and can apply rolling bearing.
The resultant force of each column's first ordered inertia force can be partially or full equilibrated by the balanced weight on the cranks, so as to achieve high running speed and fine dynamic balance.
L type Compressor not only poossesses the advantages of angle compressors,but also has its own strong points in that it runs more stable than V-type and W-type.
Product Parameters
Product Name | Tetrafluoroethylene Gas Recycle hydrogen Synthetic tail gas Reciprocating Compressor |
Compress Medium | Tetrafluoroethylene Gas , Recycle hydrogen, Synthetic tail gas |
Model No. | 3LW-10/0.1~6 |
Type | L type diaphragm compressor |
Rated flow rate (F.A.D) | 10Nm3/min |
Power | 75KW |
Suction pressure(G) | 0.01Mpa |
|
Rated outlet pressure | 0.6Mpa |
Lubricating mode | Oil Lubricate Oilless lubricate Non oil lubricate |
Transmission mode | Direct Driven |
Cooling method | Industrial circulating water cooling tower |
Dimension | 2920x1250x3140mm |
Weight | 2.8t |
Motor Speed
| 420 r/min |
Voltage | 380V, other voltage for special customize for each order |
After-sales Service | Engineers available to service overseas |
OEM | Welcomed (we have 5professional R&D engineers to do design & customizing service according to client's different requirement) |
L Type Reciprocating Compressor Features
Keepwin Process air/ gas Reciprocating compressors consist of four types that are V type, L type and Dtype, P type, M type.The exhaust pressure ranges from 1.3 to 49 Mpa. The products are widely used in the industries of national defense,scientific research,petrochemical,nuclear power,parmaceutical,food-stuff and gas separation.No gas pollution and No gas leakage during compression and transportation process.
Note:
1, In addition on the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement.
2, Clients' inquiries should contain related parameters
A. The gas compression medium
B. The flow rate: _____Nm3/hr
C. Inlet pressure: _____ Bar
D. Discharge pressure: _____ Bar
E. Inlet temperature
F. Cooling water temperature as well as other technical requirement.
KPW-L Series Piston Industrial Gas Compressor Technical Parameters:
| No. | Model | Compressed medium | F.A.D (Nm3/min) | Inlet Pressure
( Mpa) | Exhuast Pressure
(Mpa) | Power
(KW) | Speed
r/min | Dimension
（L*W*H）mm | N.W
Weight (t) | Voltage
V |
|---|
| 1 | 4LW-6/22 | propylene gas | 6 | Micro positive pressure | 2.2 | 75 | 420 | 2658*1180*3058 | 3 | 380 |
| 2 | 4L-11.3/5~14 | petroleum gas | 11.3 | 0.5 | 1.4 | 160 | 485 | 2435*1436*2460 | 2.5 | 380 |
| 3 | 4LW-7/22 | propylene gas | 7 | Micro positive pressure | 2.2 | 75 | 420 | 2522*1180*2982 | 3 | 380 |
| 4 | 4L-20/9 | coal gas | 20 | Micro positive pressure | 0.9 | 132 | 420 | 2508*1180*3090 | 3 | 380 |
| 5 | 4LW-6/22-I | propylene gas | 6 | Micro positive pressure | 2.2 | 75 | 420 | 2658*1180*3058 | 3 | 380 |
| 6 | 4L-21/1.6~24 | petroleum gas | 21 | 0.16 | 2.4 | 160 | 420 | 2598*3400*3058 | 5.5 | 380 |
| 7 | 4L-20/10 | coal gas | 20 | Micro positive pressure | 1 | 160 | 420 | 2440*1255*3090 | 3 | 380 |
| 8 | 4LW-7/17 | Trifluoroethane gas | 7 | Micro positive pressure | 1.7 | 75 | 420 | 2890*1380*3120 | 5 | 380 |
| 9 | 4LW-7/22-II | propylene gas | 7 | Micro positive pressure | 2.2 | 75 | 420 | 2890*1380*3120 | 2 | 380 |
| 10 | 4LW-13.5/20 | coal gas | 13.5 | Micro positive pressure | 2 | 160 | 420 | 3410*1200*3200 | 6.5 | 380 |
| 11 | 4LW-10/22-I | propylene gas | 10 | Micro positive pressure | 2.2 | 110 | 420 | 2480*1250*3090 | 2 | 380 |
| 12 | 4LW-8.4/24 | Vinylidene Fluoride Compressor | 8.4 | Micro positive pressure | 2.4 | 110 | 420 | 3550*1300*3300 | 2 | 380 |
| 13 | 4L-20/9-III | coal gas | 20 | Micro positive pressure | 0.9 | 160 | 420 | 3200*1300*3150 | 2.8 | 380 |
| 14 | 4LW-20/0.8~7 | coal gas | 20 | 0.08 | 0.7 | 160 | 420 | 3200*1300*3150 | 2.8 | 380 |
| 15 | 4LW-6/22-IV | propylene gas | 6 | Micro positive pressure | 2.2 | 76 | 420 | 3250*1300*3200 | 2.8 | 380 |
| 16 | 4LW-12.5/22-IV | propylene gas | 12.5 | Micro positive pressure | 2.2 | 132 | 485 | 2700*3160*3060 | 2.6 | 380 |
| 17 | 4L-17/10 | coal gas | 17 | Micro positive pressure | 1 | 160 | 420 | 2800*3160*2306 | 2.6 | 380 |
| 18 | 4LW-10/12~18 | petroleum gas | 10 | 1.2 | 1.8 | 160 | 420 | 2770*1060*2885 | 2.1 | 380 |
| 19 | 4L-36/3~19 | Natural gas | 36 | 0.3 | 1.9 | 160 | 420 | 2570*3250*2855 | 2.1 | 380 |
| 20 | 3LW-10/0.2~6 | Synthetic tail gas | 10 | 0.02~0.04 | 0.6 | 75 | 420 | 2920*1250*3140 | 2.8 | 380 |
| 21 | 3LW-10/0.1~6 | Synthetic tail gas | 10 | 0.01~0.02 | 0.6 | 75 | 420 | 2920*1250*3140 | 2.8 | 380 |
| 22 | 3LW-11.4/0.1~5.6 | Feed gas | 11.4 | 0.01 | 0.55 | 75 | 485 | 2920*1250*3140 | 2.6 | 380 |
| 23 | 3LW-10/0.1~6-I | Synthetic tail gas | 10 | 0.01~0.02 | 0.6 | 75 | 420 | 2920*1250*3140 | 2.6 | 380 |
| 24 | 3LW-10/6-I | Natural gas | 10 | 0.005~0.015 | 0.6 | 75 | 450 | 2920*1250*3140 | 2.1 | 380 |
| 25 | 3LW-30/1~2 | nitrogen | 30 | 0.1 | 0.2 | 75 | 485 | 2680*1450*3080 | 2.8 | 380 |
| 26 | 3LW-13.3/0.3～5 | Trichlorosilane | 13.3 | 0.02~0.05 | 0.5 | 75 | 485 | 2970*1150*3380 | 2.6 | 380 |
| 27 | 3LW-9/1.5~20 | Natural gas | 9 | 0.15 | 2 | 75 | 485 | 2480*1200*3350 | 2.6 | 380 |
| 28 | 3LW-7.5/1~16 | water gas | 7.5 | 0.01~0.25 | 1.6 | 75 | 485 | 2900*2670*3000 | 2.1 | 380 |
*) Specifications are subject to change without prior notice.Please contact us for any specification that is not within the parameters mentioned standard
